TDM over IP technology As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-E1-IP adopts the innovative TDM over IP technology, time division multiplexing, it transports the legacy E1/T1 data through the existing Ethernet or IP network.
E1 over ethernet TDM over IP converter
2E1 Over Ethernet TDM over IP Multiplexer
Features
● Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
● Support POE power unit embedded, support maximum 60W power over Ethernet.(optional)
● User-friendly Web server supported for easy setup and maintenance
● Point to point application and point to multipoint application are supported
● E1/T1 Port supported, E1 or T1 easy selected by Web Manager
● Uplink ports 1+1 backup supported
● Stable E1/T1 clock recovery, low jitter and wander
● Low processing delay for E1/T1 channels, high bandwidth usage efficiency
● Resist to packet loss, with PCM frame synchronization protection
● User definable encapsulation packet size for different application
● Enough jitter buffer to resist packet delay variation (PDV)
● Local Ethernet port throughput limiting, assuring E1/T1 QoS
● Local and remote E1/T1 LOS and AIS and packet loss indication for trouble-shooting and maintenance
● Support cascade concatenate for more than E1/T1 port
● Support double power or single power supplier.
● Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based,8021.1P based,MAC based and TOS based).
● Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning.
● Ethernet packet size up to 9720byte
4E1 over Ethernet Multiplexer 4E1 TDM over IP
Features
1. User-friendly Web server supported for easy setup and maintenance
2. Point to point and point to multipoint supported
3. Four E1/T1 Ports supported, E1 or T1 easy selected by Web Manager
4. Uplink ports 1+1 backup supported
5. Stable E1/T1 clock recovery, low jitter and wander
6. Low processing delay for E1/T1 channels, high bandwidth usage efficiency
7. Resist to packet loss, with PCM frame synchronization protection
8. User definable encapsulation packet size for different application
9. Enough jitter buffer to resist packet delay variation (PDV)
10. Local Ethernet port throughput limiting, assuring E1/T1 QoS
11. Local and remote E1/T1 LOS and AIS and packet loss indication for trouble-shooting and maintenance
- SupportIETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP
- E1 clock supports 3 mode: local clock, adaptive and loopback
- Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based、8021.1P based、MAC based and TOS based).
- Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, CDP, Ethernet ring protection, OAM and MAC address automatic learning
- Support POE (maximum power: 60W) (optional)
8E1 over IP Mux 8E1 TDM over IP
Features
- User-friendly Web server supported for easy setup and maintenance
- SupportIETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP
- Point to point and point to multipoint application
- Eight E1 Ports supported
- Provide 4 FE electrical ports and 1 FE optical port, 2 uplink ports, 2 local data ports or monitoring ports, optical port can be used for uplink or local data.
- Stable E1 clock recovery, low jitter and wander
- Low processing delay for E1 channels, high bandwidth usage efficiency
- Resist to packet loss, with PCM frame synchronization protection
- User definable encapsulation packet size for different application
- Support VLAN settings for E1 service and in band VLAN management.
- E1 clock supports 3 mode: local clock, adaptive and loopback
- Enough jitter buffer to resist packet delay variation (PDV)
- Local Ethernet port throughput limiting, assuring E1 QoS
- Local and remote E1 LOS and AIS and packet loss indication for trouble-shooting and maintenance
- Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based、8021.1P based、MAC based and TOS based).
- 16.Ethernet supportIEEE 802.3x, RSTP (1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning
- Ethernet packet size up to 9720byte
- Support POE (maximum power: 60W) (optional)
16E1 over Ethernet TDM over IP converter
Features
- SupportIETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
- Provide 4 FE electrical ports and 1 FE optical port, 2 uplink ports, 2 user data ports or monitoring ports, optical port can be used for uplink or user data.
- User-friendly Web server supported for easy setup and maintenance
- Support SNMP V1/V2 network management
- E1 clock supports 3 mode: local clock, adaptive and loopback
- E1 service support lossy and lossless protection
- E1 support local and remote loops
- Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based、8021.1P based、MAC based and TOS based).
- Ethernet supportIEEE 802.3x, RSTP (802.1w), LLDP, CDP, Ethernet ring protection, OAM and MAC address automatic learning
- Ethernet packet size up to 9720byte
- Support point to point (working pair,one at each end of the network) and point to multipoint application
- Local Ethernet port throughput limiting
- Software and hardware online upgrade
- Power supply redundancy
- 120Ωbalanced E1/T1 port, RJ-45 connector, support 75Ω unbalanced port through outside converting cable.
- Support cascade concatenate for more than 16 E1 ports
